General Descriptions
Refer to milk powder, there are two types: one is full-fat milk powder, the other is skimmed milk powder, and there are so much differences between these two kinds of milk powder. Normally , our design is based on user’s request.
Production line overview
The milk production line can be applied to the production of various liquid milks, such as grassland fresh milk, flavored milk, yogurt drinks, yogurt and lactic acid bacteria drinks. This small production line (300L/h-1000l/H) is characterized by reasonable design, compact structure, beautiful layout, effective energy saving, and simple operation and maintenance. It is especially suitable for new product development equipment of small production enterprises and experimental practice equipment of scientific research institutes, colleges and universities.
Processing description
The line is mainly composed of water & powder mixer, double segment plate-type heat exchanger, high speed mixing tank, plate sterilizer (95ºC, 300S, 125ºC, 15S), heat preservation tank, homogenizer (25MPa), fermentation tank, high position tank, rotor pump and self-priming pump,spray drying ,sifter and so on.
Detailed processing introduction
- 1. Water Treatment section:
- Sand filter, Activated carbon filter, Water softener, Precision filter, Reverser osmosis filter, Electrical control system, UV filter, Water storage tank
- 2. Milk Receiving Section
- Out door storage tank, Milk weight tank, Milk receiving tank, Temporary storage tank, Duplex filter, Milk Separator, Plate heat exchanger, Milk Storage Tank
- 3. Mixing Section
- Hot water tank, Plate heat exchanger, Square high speed emulsification tank,
- Water-powder mixer, Mixing tank, Oilcan, Pipeline flow meter, Duplex Filer, Homogenizer
- 4. Concentration Section
- Three-efficiency concentrating tower, Balance tank, Double sealed circulating pump, The single sealing health pump, Cooling water pump, Self-priming pump, Water ring vacuum pump, Cooling tower
- 5. Drying section
- Concentrated milk tank, High-pressure pump, Spray-drying tower, Fluidized bed, Electric sieve, Milk powder groove
- 6. Packing Section 7.CIP Cleaning Section
- Acid tank, Alkali tank, Hot water tank, Pleat heat exchanger, Cleaning pump 8.Compressor
- Air compressor, Air filter, Air dryer, Air storage tank
- 9. Boiler section
- Horizontal boile, Steam tank
- 10. Refrigeration section
- Refrigeration machine, Ice water tank, Cooling tower, Ice water pump, Pipeline centrifugal
All the equipments and pipelines touching materials are made of stainless steel SUS304
products parameters
| Item/Parameters/Model | LPG |
| 5 | 25 | 50 | 100 | 150 | 200-2000 |
| Inlet air temperature(℃) | 140-350 (automatically controlled) |
| Outlet air temperature(℃) | 80-90 |
| Max capacity of evaporation moisture (kg/h) | 5 | 25 | 50 | 100 | 150 | 200-2000 |
| Driving form of rotary atomizer | Electric | Mechanical or electric |
| Rotating speed (rpm) | 25000 | 18000 | 18000 | 18000 | 15000 | 8000-15000 |
| Diameter of rotary disc (mm) | 50 | 120 | 120 | 120 | 150 | 180-340 |
| Heating resource | Electric | Electric | Electric+steam,oil or gas etc | Electric+steam, oil or gas etc | Electric+steam, oil or gas etc | Electric+steam, oil or gas etc |
| Max electrical heating power (kw) | 18 | 36 | 60 | 81 | 99 | Depends on the speific situation |
主要流程图 Drying flow chat
Details Image
